Attaching your Camera to the Quad Pod Jr.
1. Make sure the Quad Pod is facing forward.
2. Hold the quad in one hand and the camera in the other.
3. Line up the hold down screw located in the center of the Quad Pod with the threaded hole on the bottom of your camera.
4. Hand tighten till the camera is secure, then finish tightening with a flat head screwdriver or simply use a quarter.
Attaching your Camera to all other Quad Pods
See the Manfrotto Instructions for details.
Remove Quick Release Plate From adapter.
1. Make sure the Quad Pod is facing forward; the adapter and quick release plate lever will be facing you.
2. Remove the quick release plate by opening the lever. The lever cannot be opened if the safety lever is in closed position. To remove the plate, rotate safety lever fully in the direction of the arrow then rotate lever until peg clicks up holding the lever open.
Assembling Camera On Plate
1. Fix the camera onto plate by screwing plate screw into the cameras threaded hole without applying too much force, using the tightening ring.
2. Before fully locking, align the camera with the “LENS” marking on the bottom of the plate.
Mounting the Camera on the Quad Pod Adapter
1. Push the tightening ring down so it is flat against the plate.
2. Now attach your camera (plate) to the Quad Pod Adapter head until it clicks and closes.
3. Rotate the small brass safety lever to lock it down.
Removing the Camera from the Quad Pod
1. Set the Quad Pod down and release the safety lever on the adapter head.
2. Hold the camera securely in one hand and open the quick release lever with the other to remove the camera.
Using a shoulder strap or shock strap
1. Adjust the strap length to suit your needs.
2. Connect to the eye hooks on each of the quad pods hand grips.
Care and maintenance
Quad Pods are manufactured solid and very strong. They are finished with a state of the art technique called UV (ultra violet) Powder coating, which provides a durable finish that will last a lifetime. It’s a good idea to periodically make sure the adapter head is tightly connected and the quick release plate on your camera is snug.
Instructions